Connectors
2-12
ADSP-21160 EZ-KIT Lite Evaluation System Manual
Expansion Connectors (P1–3)
Three board-to-board connectors provide signals for most of the proces-
sor’s peripheral interfaces. Analog Devices does not populate the
expansion connectors or provide any additional support for the interface.
See
“Expansion Interface” on page 2-4
expansion interface. Contact Samtec for the availability and pricing of the
connectors. For the exact pinout of the connectors, refer to
EZ-KIT Lite Schematic” on page B-1
Power Connector (P4)
The power connector (
P4
) provides all of the power necessary to operate
the EZ-KIT Lite board.
Part Description
Manufacturer
Part Number
90-position 0.05” spacing (
P1
,
P2
,
P3
)
SAMTEC
SFM-145-01-S-D
Mating Connectors
90-position 0.05” spacing (through hole)
SAMTEC
TFM-145-x1 series
90-position 0.05” spacing (surface mount)
SAMTEC
TFM-145-x2 series
90-position 0.05” spacing (low cost)
SAMTEC
TFC-145 series
Part Description
Manufacturer
Part Number
2.5 mm power jack (
P4
)
SWITCHCRAFT
RAPC712X
DIGI-KEY
RAPC712X-ND
Mating Power Supply
(shipped with EZ-KIT Lite)
7.0V power supply
GLOBTEK
TR9CC2000LCP-Y
www.BDTIC.com/ADI