LEDs and Push Buttons
2-8
ADSP-21160 EZ-KIT Lite Evaluation System Manual
LEDs and Push Buttons
This section describes the functionality of the LEDs and push buttons.
shows the locations of the LEDs and push buttons.
Reset LED (LED7)
When
LED7
is lit, the master reset of all the major ICs is active.
Reset LED does not necessarily indicate that the USB interface has been
reset. The USB interface resets on power-up or when USB communica-
tion has not been initialized.
Figure 2-3. LED and Push Button Locations
www.BDTIC.com/ADI