Analog Devices ADSP-21160 EZ-KIT Lite, Руководство пользователя

Страница: 32 / 66

Example Programs
1-10 ADSP-21160 EZ-KIT Lite Evaluation System Manual
The signal locations can be found in “ADSP-21160 EZ-KIT Lite Sche-
matic” on page B-1 . The interrupt pins are summarized in Table 1-3 . For
more information on configuring the
~IRQ
pins, see the ADSP-21160
SHARC Processor Hardware Reference .
Example Programs
Example programs are provided with the ADSP-21160 EZ-KIT Lite to
demonstrate various capabilities of the evaluation board. These programs
are installed with the EZ-KIT Lite software and can be found in the
…\211xx\Examples\ADSP-21160 EZ-KIT Lite
subdirectory of the Visu-
alDSP++ installation directory. Please refer to the readme file provided
with each example for more information.
Flash Programmer Utility
The ADSP-21160 EZ-KIT Lite evaluation system includes a Flash Pro-
grammer utility. The utility allows you to program the flash memory on
the EZ-KIT Lite. The Flash Programmer is installed with Vi+.
Once the utility is installed, it is accessible from the
Tools pull-down
menu.
For more information on the Flash Programmer utility, go to online Help.
Table 1-3. Interrupt Pin Summary
Interrupt
1
1
IRQ2–0
are available on connector
P2
.
Connects To Description
IRQ0 SW3 IRQ2–0
connect to the push buttons and supply
feedback for program execution. For instance, you
can write your code to trigger a flag when a rou-
tine is complete.
IRQ1 SW4
IRQ2 SW5
www.BDTIC.com/ADI