ADSP-21160 EZ-KIT Lite Evaluation System Manual
xi
Preface
• SBSRAM
D
512 Kb (64K x 32-bits x 2-chips)
• Flash memory
D
512 Kb (512K x 8-bits)
• Interface connectors
D
14-pin emulator connector for JTAG interface
D
SPORT0
connectors
D
Two link port connectors
D
Expansion interface connectors (not populated)
• General-purpose IO
D
3 push buttons connected to processor IRQs
D
3 LEDs connected to processor flags
The EZ-KIT Lite board has two types of external memory: flash memory
and SBSRAM. The flash memory can store user-specified boot code. By
configuring the boot mode switch (
SW1
) and programming the flash mem-
ory, the board can run as a stand-alone unit. For information about the
external memory, see
.
SPORT0
is interfaced to an audio codec, facilitating development of audio
signal processing applications.
SPORT0
also connects to an off-board con-
nector for communication with other serial devices. For information
about
SPORT0
, see
“SPORT0 Audio Interface” on page 2-4
.
Additionally, the EZ-KIT Lite board provides access to most of the pro-
cessor’s peripheral ports on populated expansion interface connectors. For
information about the expansion interface, see
www.BDTIC.com/ADI