UG-1571
Rev. 0 | Page 7 of 18
BATTERY FUEL GAUGE SETTINGS
Program the battery state of charge (SoC) curve with the proper
voltage from battery characterization or the default setting in
the
Battery SoC %
section. This section is located in the
Fuel
Gauge Control
tab (see Figure 11). Enter all battery characteriza-
tion data, then click the
Program SoC Curve
button to write all
data to the
. The GUI then updates the
Battery SoC
Curve
graph. Other battery parameters in the GUI include the
BAT_CAP
,
BATCAP_TEMP
, and
BATCAP_AGE
. Sleep mode
related setting options, such as
SLP_CURR
and
SCP_TIME
, are
selected in the bottom left of the
Fuel Gauge Control
tab as well.
The
Battery SoC %
,
Battery Voltage (V)
, and
BAT_SOCACM %
values are read in the tab in Figure 11.
20
603-
01
1
GUI Software,
Fuel Gauge Control
Tab
