Analog Devices ADP5061, Быстрый старт

Страница: 5 / 13

Evaluation Board User Guide UG-467
Rev. 0 | Page 5 of 12
10993-
014
Figure 4. ADP5061 Evaluation Software GUI, Register R/W Tab
DIRECT REGISTER READ AND WRITE
It is possible to read and write the content of each register using
the
Register R/W tab as indicated in the GUI. Click READ ALL to
update the contents of each register in the GUI. A single register
read or write can be done using the controls on the right side of the
Register R/W tab of the GUI. Type the I 2 C sub address in the
Sub Address for READ and WRITE (0x00) box, and then press
ENTER . Click READ to read the binary data, or click WRITE
to write the binary data. Type the binary data for an I 2
C write,
and then press ENTER . Note that some registers, such as
Register 0x00 and Register 0x01, are read only registers and
cannot be overwritten.