Evaluation Board User Guide
One
Technology Way
•
P.O. Box 9106
•
Norwood, MA 02062-9106, U.S.A.
•
Tel: 781.329.4700
•
Fax: 781.461.3113
Tiny I
2
C Programmable Linear Battery Charger with
Power Path and USB Mode Compatibility
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 12
FEATURES
Input voltage 4.0 V to 6.7 V
High current terminals for
power connection
(VINx), system voltage (ISO_Sx), and battery voltage
(ISO_Bx) pins
operation configurable via I
2
C interface
Evaluation software included
PACKAGE CONTENTS
evaluation board
USB Micro A-to-USB Micro B cable
USB A adapter board
Evaluation CD:
evaluation software installer
HARDWARE REQUIREMENTS
USB-to-serial-I/O interface
is not supplied in the evaluation kit and should be
ordered separately from Analog Devices, Inc.)
SOFTWARE REQUIREMENTS
Analog Devices
SDP evaluation software
GENERAL DESCRIPTION
charger evaluation system is composed of an
evaluation board, an USB A-to-USB Micro B cable, and an USB A
adapter board. All evaluation board functions and circuits are
controlled via one I
2
C bus connector. The I
2
C bus interfaces with
the
directly, and the digital input/output signals are
controlled through an on-board input/output expander circuit
on the I
2
C bus. The evaluation board also features a 3.4 V regulator
for VDDIO generation. The board contains jumpers and numerous
test points for easy evaluation.
The
evaluation kit contains a CD with the
graphical user interface (GUI) Version 3.0 installer.
Use the GUI in conjunction with the
USB
to serial I/O interface.
Full performance details are provided in the
data
data sheet should be consulted in
conjunction with this user guide.
EVALUATION BOARD
10993-
001
Figure 1.
