EVAL-ADP8860
Rev. 0 | Page 3 of 24
INSTALLING THE SOFTWARE
Before starting the software installation, make sure that the
ADP8860 adapter board is not connected to the USB port
of the PC.
Note: If the PC has LabVIEW™ already installed, this following
step is not needed.
The application software is a compiled LabVIEW program requir-
ing that the LabVIEW 8.5, or later version, run-time engine be
installed on the PC. You can download the LabVIEW run-time
engine on National Instrument’s website. A LabVIEW 8.5 run-
time installation is available in the ADP8860 installation CD.
After installation, it may be necessary to reboot the PC to
complete the operation.
1.
Launch the
Setup.exe
file. When the dialog box shown
in Figure 2 appears, click
Next>
to continue.
0
79
88
-0
02
Figure 2. ADP8860 Evaluation Software Setup
2.
Click
Yes
to accept the license agreement (see Figure 3).
07
98
8-
0
03
Figure 3. License Agreement
3.
Click
Next>
to install the files to the default destination folder
or click
Browse…
to choose a different file (see Figure 4).
07
98
8-
00
4
Figure 4. Choose Destination Location
4.
Select the
Typical
set up type and click
Next>
to continue
with the installation (see Figure 5).
0
798
8-
0
05
Figure 5. Setup Type
