Audio EI3 Extender Board Manual
1-3
Using Audio EI3 Extender Board
System Requirements
Verify that your PC has these minimum requirements for the CCSE
installation:
• 2 GHz single-core processor
• 1 GB RAM
• 8 GB available disk space
• One open USB port
A faster disk drive decreases the build time, especially for a large
amount of source files
.
Audio EI3 Extender Board Setup
The Audio EI3 Extender Board does not have any configuration that is
required. Make sure the EZ-KIT Lite/EZ-Board that the Audio EI3
Extender Board will be connected to is set up properly.
Before powering the board, use the provided hardware to secure the
extender to the EZ-KIT Lite/EZ-Board. The small spacers are intended
for between the extender board and the mating board. If used, standoffs
on the EZ-KIT Lite/EZ-Board may need to be removed. The extender
board uses shorter standoffs and a screw secures these standoffs.
Refer to the readme text files in the CrossCore Embedded Studio direc-
tory (
<
install_path
>\Audio_EI3_Extender_Board-Rel
X.X.X
\Audio_EI3
,
where
X.X.X
denotes the support package release number) for information
on how to configure the EZ-KIT Lite boards. For more information on
the Audio EI3 Extender Board, please go to
http://www.analog.com/
EI3-Audio
. The board support package (BSP) for the Audio EI3 Extender
Board can be found at this website.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
