Analog Devices AD9522 Series, Руководство пользователя

Страница: 4 / 16

UG-077 Evaluation Board User Guide
Rev. 0 | Page 4 of 16
EVALUATION BOARD SOFTWARE
Use the following instructions to set up the AD9522 evaluation
board software.
SOFTWARE INSTALLATION
Do not connect the evaluation board until the software
installation is complete.
1.
Insert the AD9522 evaluation software CD-ROM. The
evaluation software and documentation can also be
downloaded from2.
If using the CD, double-click My Computer , and then
double-click the AD9522EV CD icon. A window opens
showing the contents of the CD divided into four sections:
Datasheet , Layout , Schematic , and Software . Double-
click the Software folder. Checupdates to the evaluation software.
3. Double-click AD9522Eval_Setup1.1.0.exe . Follow the
installation instructions. The default location for the
evaluation software is
C:\Program Files\Analog Devices\
AD9522 Eval Software\ .
RUNNING THE SOFTWARE
Power up and connect the evaluation board to the PC. See the
Evaluation Board Hardware section for details on the various
connectors on the evaluation board.
1.
Double-click AD9522 Eval Software to run the AD9522
evaluation software. Depending on whether the evaluation
board was found by the software, either light blue text
appears in a pop-up window, indicating that the evaluation
board was found, or red text appears, indicating that the
evaluation board was not found.
2. If the evaluation board is found, click anywhere in the pop-
up window with the
Evaluation Software Ready message,
and the main window for the software appears. Proceed to
the Evaluation Software Components section for details
about running the software.
If the evaluation board is not found, a dialog box appears
allowing you to select which AD9522-x evaluation board is
connected while the software runs in standalone mode.
Standalone mode is useful for viewing and generating
register setup files.
See the Evaluation Board Hardware section for information on
connecting the evaluation board.
If the evaluation board is connected while the evaluation
software is running, the following window appears to prompt
you to load the evaluation board with the evaluation software
settings or read the evaluation board settings into the software.
08747-
002
Figure 2. SYNC Evaluation Software
If the evaluation board was not automatically detected when it
was connected, you can also select the
Select Evaluation Board
option from the I/O menu (see Figure 24), and select EZSSP-0 ,
EZSSP-1 , or EZSSP-2 .
08747-
003
Figure 3. Select USB Device
See the Evaluation Software Components section for a
description of the evaluation software features, or the Quick
Start Guide to the AD9522 PLL section for details on the
individual blocks of the AD9522.