EVAL-AD5758
User Guide
UG-1268
Rev. 0 | Page 9 of 20
167
10-
00
7
Figure 9.
AD5758
Memory Map in the
ACE
Software
INITIAL CONFIGURATION
An initial configuration wizard is available when opening the
AD5758
plug-in. The initial configuration wizard allows quick
configuration of the
AD5758
and provides configuration of the
clock output in the general-purpose configuration register, the
dc-to-dc settings, DAC configuration, and the DAC input register.
Clicking the
Apply
button initiates the configured settings in
the order of the recommended power-up sequence described in
the
AD5758
data sheet.
DC-TO-DC CONVERTER SETTINGS
If the V
DPC+
pin is not tied directly to AVDD1, then the dc-to-dc
converter must be enabled for correct operation. This step must
be completed before configuring the DAC output. The
DC-DC
Configuration
popup menu, shown in Figure 10, contains the dc-
to-dc settings required to configure the
AD5758
output correctly.
After the desired settings are selected, click the
Close
button and
then click
Apply Changes.
16
710-
0
08
Figure 10.
DC-DC Configuration
Pop-Up Menu
