UG-970
EVAL-AD5317RDBZ User Guide
Rev. A | Page 6 of 13
GAIN Control
To set the GAIN pin high or low, click the blue progressive
disclosure option on the
GAIN SELECT
block to access the
Gain
Control
window, as shown in Figure 6. In the
GAIN
selection
box, select
X1
for a full-scale output of 2.5 V or select
X2
for a
full-scale output of 5 V.
14449-
006
Figure 6.
Gain Control
Window
LDAC Mask Register
Each DAC can be configured to respond to or ignore the LDAC
pin settings in the
LDAC Configuration
window. Click the blue
progressive disclosure option to access the
LDAC Configuration
window, as shown in Figure 7. When the LDAC selections are
completed, click
OK
to write the appropriate values to the
. The
LDAC MASK
indicator lights up accordingly
when an LDAC mask of a DAC is enabled.
14449-
007
Figure 7.
LDAC Configuration
Window
