June 2019
L011804
Connecting to the MBC15081
The MBC25081 is designed with cost savings and size as two of the primary design criteria. For this reason,
the MTA-100 series connector was chosen for these products as a reliable small and low cost connector.
This is a common Insulation Displacement Connector (IDC) manufactured by AMP Corporation. The
inputs to the driver are on a 7-pin connector and the motors are on a 4-pin connector. These connectors
are not supplied with the driver, but can be purchased from Anaheim Automation or AMP/Tyco Electronics.
These two images show how a hand tool can be used to quickly make the cable to connect to the driver.
This cable can be made in approximately 10 seconds per wire using the hand tool.
Tooling from AMP/Tyco Electronics
Part Number
Description
58074-1
Manual Hand Tool with Interchangeable Head (shown above)
58075-1
Air Hand Tool with Interchangeable Head
58338-1
Air Bench Mount Tool with Interchangeable Head and Foot Switch
58246-1
Die Head for Closed End MTA-100 Connectors (shown above)
Connectors from AMP/Tyco Electronics
Part Number
Description
640440-7
7 Pin MTA-100 Connector, Closed End with Lock, 22 AWG Red, Tin Plated
640440-4
4 Pin MTA-100 Connector, Closed End with Lock, 22 AWG Red, Tin Plated
640441-7
7 Pin MTA-100 Connector, Closed End with Lock, 24 AWG White, Tin Plate
640441-4
4 Pin MTA-100 Connector, Closed End with Lock, 24 AWG White, Tin Plated
640440-7
7 Pin MTA-100 Connector, Closed End with Lock, 26 AWG Blue, Tin Plated
640442-4
4 Pin MTA-100 Connector, Closed End with Lock, 26 AWG Blue, Tin Plated
July 2018
