AnaCom AnaSat SSPA series Скачать руководство пользователя страница 23

 
 

3133503

 

A

NA

C

OM

 

AnaSat

®

 SSPA

 

23

 

 
LIMITED WARRANTY 

 

If this product should fail due to defects in materials or workmanship, AnaCom, Inc., will, at its 

sole option, repair or replace it with new or rebuilt parts free of charge for a period of two (2) years 
from the date of shipment from the AnaCom factory.  This warranty covers only failures due to defects 
in materials and workmanship that occurs during the period of the warranty.  It does not cover damage 
that occurs during shipment, failure caused by operation of the product outside the published electrical 
or  environmental  specifications,  or  malfunctions  caused  by  misuse  of  the  product.    Expendable 
components are not covered under this warranty. 

 

In order for the customer to exercise their rights to repairs under the warranty, the customer must 

first contact AnaCom to obtain a repair authorization number (RMA).  If it is necessary to return the 
product for repair, the customer is responsible for paying the cost of shipping it to AnaCom.   AnaCom 
will pay the cost of shipping the product back to the customer when the repairs are completed.   All 
import  duties,  customs  fees,  taxes  of  any  kind,  or  any  related  fees  are  the  sole  responsibility  of  the 
customer. 

 

Spare  parts,  repairs,  or  replacements  are  warranted  to  be  free  from  defects  in  material  or 

workmanship for ninety (90) days or the remainder of the limited warranty period, whichever is longer. 

 

There are no express or implied warranties except as listed above.  In no event shall AnaCom be 

liable for special, incidental, or consequential damages arising from the use of this product, or arising 
out  of  any  breach  of  this  warranty.    All  express  and  implied  warranties,  including  the  warranties  of 
merchantability  and  fitness  for  a  particular  purpose,  are  limited  to  the  applicable  warranty  period  set 
forth  above.    No  employee  or  representative  of  AnaCom  is  authorized  to  modify  this  warranty  or 
AnaCom’s standard warranty for any product. 

 

Non-warranty  repair  service  is  available  from  AnaCom  for  a  nominal  charge.    Non-warranty 

repair  service  can  be  obtained  by  contacting  AnaCom  and  requesting  a  return  authorization  number 
(RMA),  as  described  above.    The  customer  is  responsible  for  paying  the  cost  of  the  shipping  to  and 
from  AnaCom  for  any  non-warranty  repairs.    Non-warranty  repair  service  will  be  available  for  any 
AnaCom  product  for  a  minimum  of  five  years  from  the  date  of  its  first  shipment  from  AnaCom’s 
factory. 

 

 

Содержание AnaSat SSPA series
























Отзывы: