amzchef YL28-DC08, Инструкция по эксплуатации

Страница: 9 / 10

9
9.Trouble Shooting
TROUBLE POTENTIAL CAUSES RESOLUTION
Power indicator not on Power cord is not connected
well Please ensure the plug inserted
into the socket
Power off automatically 1. Spare parts over heat
2. No operation in two
hours
Please restart the cooker,
otherwise, return it to the service
center for checking and repairing
LED shows E0 1. No pot
2. Pot too small
3. Pot is not suitable Put the suitable pot on the surface
of the cooker. It will return to the
state of power on if without any
operation for 30 seconds.
LED shows E2 Temperature sensor open
circuit or short circuit Please return the cooker to the
service center for checking and
repairing
LED shows E3 High voltage protection Please ensure 150V
＜
voltage
＜
270V.
LED shows E4 Too low voltage protection Please ensure 150V
＜
voltage
＜
270V.
LED shows E5 High temperature protection.
The internal temperature of
the product exceeds 180℃. Start again after the temperature
cool down
LED shows E6 IGBT overheat. The internal
temperature of the product
exceeds 100℃ Please check if the air intake and
outlet is jammed. If not, please
return the cooker to the service
center for checking and repairing
Note: If the faults can not be resolved, please do not disassemble the appliance by yourself, but
return it to the service center for repairing. If you disassemble the appliance by yourself, we have
the right to make the warranty invalid. Dangers or other safety accidents caused by this will also
be charged to the user.