press
within 5 seconds.
Note:
if your radio’s interference Eliminator Code is set to
while scanning, the radio checks for activity on each channel
regardless of the code used on the channel. If your radio’s
interference Eliminator Code is set to
, the radio checks for
activity only on channels using codes
and ignores channels
using code
Scan Advance
If the radio stops scanning on a channel you do not want to listen
to, briefly press and release or
to resume scanning for the
next active channel.
Removing Channels from the Scan List (Nuisance Delete
Feature)
To remove a channel so the radio does not stop on it while
scanning, press and hold
or
for at least 3 seconds, then
release. This temporarily removes the channel from the scan list.
To restore the channels, turn the radio off and then back on.
Note
: You cannot remove the channel which your radio was set to
(called your home channel) when you start scanning.
Special Features
Interference Eliminator Code
Interference Eliminator Codes help minimize interference by
providing you with choice of code combinations.
To set code for a channel.
1.
Press
until the code starts to flash.
2.
Press or to select the code
3.
Press
to save the code setting
You can set a different code for each channel using this
procedure.
Note:
You must set the interference Eliminator Code to on a
radio that uses interference Eliminator Codes to communicate
with other radios that do not have interference Eliminator Codes.
Push to Talk Timeout Timer
To prevent accidental transmissions and save battery life, the
radio emits a continuous warning tone and stops transmitting if
you press
for 60 continuous seconds.
Locking the Keypad
To avoid accidentally changing your radio settings, press and
hold
for 3 seconds or until
is displayed. You can turn the
radio on and off, adjust the volume, receive, transmit, send a call
tone, and monitor channels. All other functions are locked.
To unlock the radio, press and hold
for 3 seconds or until is
no longer displayed.
Alert
Channel Busy Indicator
When a Channel is busy, the LED flashes twice per second.
Setting and Transmitting Call Tone
Your radio can transmit different call tones to other radios in your
group so you can alert them that you want to talk.
To set a call tone:
1.
With the radio on, press
3 times. The current call tone
setting flashes and
C
displays.
7
8
Содержание AW 827
Страница 1: ...User s Manual AW 827 Two Way Radio...
