background image

AMYPOWER ALLTRACK R3 & R SERIES - Owner’s Manual (Rev. A)

 

 

5

IV. NOTICE –READ BEFORE USE 

 

A.  Choose the Right Chair & Safety Options 
Amypower provides a choice of many power 
wheelchair styles, sizes and adjustments to meet 
the needs of the user. However, final selection of 
a wheelchair rests solely with you and your health 
care professional. Choosing the best chair for you 
depends on such things as: 

 

1.  Your size, disability, strength, balance coordination. 
2.  Your intended use and your level of activity. 
3.  The types of hazards you must overcome in daily 
use (in areas where you are likely to use your chair). 
4.  The need for options for your safety and comfort 
(such as positioning belts or specialty seating 
systems). 

 

B.  Adjust Chair to Your Ability 
You need to work with your doctor, nurse or therapist, 
and your supplier, to fit this chair and adjust the 
controller settings for your level of function and ability. 

 

C.  Review this Manual Often 
Before using this chair, you and each person who 
may assist you, should read this entire Manual and 
make sure to follow all instructions. Review the 
warnings often, until they are second nature to you. 

 

  D.  Warnings   

The word “WARNING” refers to a hazard or unsafe 
practice that may cause severe injury or death to 
you or to other persons. The “Warnings” are in four 
main sections, as follows: 

 

  E.  Caution

                                                      

              

Federal law restricts this device to sale by or on the 
order of a practitioner licensed by the law of the State in 
which he/she practices.

 

 

 

  1.  V - EMI 

Here you will learn about electromagnetic     
interference and how it can affect your chair. 

VI - GENERAL WARNINGS 

Here you will find a safety checklist and a 
summary of risks you need to be aware of before 
you ride this chair. 

VII - WARNINGS — COMPONENTS & OPTIONS Here 

you will learn about your chair. Consult your supplier 
and your health care professional to help you choose 
the best set-up and options for your safety. 

XI - BATTERIES 

Here you will learn about battery and charger 
safety, and how to avoid injury. 

NOTE- Where they apply, you will also find “Warnings” 
in other sections of this Manual. 

Throughout this owner’s manual and on the 
wheelchair you will see the icons listed below 
to identify warnings and potential hazards. It is 
important to read all of them and understand 
them. 

   

WARNING! These warnings must be followed, failure 

to do so may cause personal injury or may dam- age 
the wheelchair. 

 

    

PROHIBITED! Prohibited actions must never be 

performed. Performing an action that is prohibited can 
cause personal injury or may damage the wheelchair. 

NOTE: Notes are informative statements to help further 
explain actions, warnings or product detail. 

     ESD:   Electrostatic Discharge has a potential to 

damage printed circuit boards unless handled correctly. 
When the ESD symbol is shown throughout the owner’s 
manual, use the Proper Handling Techniques insert 
supplied with the chair to properly handle this situation.  

 

 
 

V. EMI (ELECTROMAGNETIC INTERFERENCE) 

 

 

 WARNING

 

Read all warnings to reduce the risk of 
unintended brake release or chair movement: 

1.   Beware of the danger from hand-held 

transceivers. Never turn on or use a hand-held 
transceiver while power to your chair is on. Use 
extra care if you believe that such a device may 
be in use near your chair. 

2.  Be aware of nearby radio or TV stations, and 

avoid coming close to them. 

3.  If unintended movement occurs, turn your chair off 

as soon as it is safe to do so. 

 WARNING - 

A.

  WHAT IS EMI?  

1. EMI means: electromagnetic (EM) interference (I). 
EMI comes from radio wave sources such as radio 
transmitters and transceivers. (A “transceiver” is a 
device that both sends and receives radio wave signals). 

2.  There are a number of sources of intense EMI in 

your daily environment. Some of these are obvious 
and easy to avoid. Others are not, and you may not 
be able to avoid them. 

3.  Powered wheelchairs may be susceptible to 

electromagnetic interference (EMI) emitted from 
sources such as radio stations, TV stations, amateur 
radio (HAM) transmitters, two way radios, and cellular 
phones. 

 4.  EMI can also be produced by conducted sources 

or    electrostatic discharge (ESD). 

Содержание Alltrack R































Отзывы: