P·16
This is the key element of the wheelchair. The unit is installed on one of the armrests
and is connected to the engine and the batteries via the controller.
After starting the engine, the indicator shows the current setting of the maximum
speed. This maximum speed can be adjusted by the user via the button for setting the
maximum/minimum speed.
These are only suitable for use with the chair. Do not use these plugs to power other
electrical devices. This can damage the chair as well as its E.M.C.
This triggers the current for the electronic equipment of the control system, which
then supplies the power to the motor of the chair. Do not use this button to stop
the wheelchair except in cases of emergency. This can damage the control features
of the chair.
The Joystick is primarily used for navigating chair movements including speed and
direction (front, back, left and right) the further forward you push the joystick the
more the speed increases. As soon as you release the joystick it automatically returns
to the centre and instantly stops the chair.
The horn beeps when you press the button.
CONTROL UNIT
SPEED SETTING BUTTON
CHARGER PLUGS
START BUTTON
JOYSTICK
HORN BUTTON
USAGE
