16
13.
ASSEMBLING YOUR SCOOTER
1.
• Line up the drive train and
the front chassis. Lower the
front chassis onto the drive
train until the drive train
release lever engages.
You should hear the click.
2.
• Reinstall the battery pack by gently lowering it into position
onto the frame.
3.
• Loosen the tiller adjustment knob, lift tiller to the desired
upright position and tighten the knob.
4.
• Install the basket by placing it onto the bracket and push down
to lock it in place.
5.
• Install the seat by holding it
on an angle to see the swivel
post underneath.
6.
• Then inserting the post into
the receptacle.
7.
• Push down on the seat to lock it in place then move the seat left
and right, to make sure it is locked in place.
8.
• Before driving, unlock the tiller by turning the tiller lock
knob 90 degrees counter clockwise to the unlocked position.
Without this, your tiller will not turn and could cause injury!
