AMX vision2 V8.4 Скачать руководство пользователя | Manualshive

Страница: 69 / 92

background image

Archive Service

61

Vision

2

Instruction Manual

The following table lists the recommended bitrates for MPEG-2 video:

High-definition is supported for playback to a set-top box. The recommended bitrate is 8-12 Mbits.

MPEG-4 AVC (H.264)

MPEG-4 files must be encapsulated in an MPEG-4 stream (.mp4). Files must have the MOOV Atom at the start of the file for fast

start. The audio must be in AAC format. The following table lists the recommended bitrates for MPEG-4 video.

NOTE: The bitrates specified above are for playback on a PC unless otherwise stated.

MP3

A bitrate setting is not required when uploading MP3 files as the bandwidth requirements are modest compared to video. All MP3

files are uploaded using high bitrate.

NOTE: Tablet users can only view and play MPEG 4 and MP3 files.

Set-top box users can only view and play MPEG 2 and MP3 files.

Video on Demand and Managing Content

All content is stored in the archive in a hierarchical structure, much like folders on a PC, and is displayed in a similar manner in the

archive service menu. The terms folder and category are interchangeable, similarly video refers to either video or audio files.
The Archive > Recent Updates page shows the 100 most recent updates in the selected archive. This page only shows published

videos. If the user is a non administrator and access control is enabled on this archive then they user will only see updates in

folders that they have been given view permission to by the system administrator. Select a video and click Open Containing

Category to show the category containing the selected video.
Choose Archives > Browse to view the list of archives configured in your system (FIG. 86).

NOTE: Any account that is not an Administrator, will only see published videos when browsing an archive from a tablet or Set Top Box

interface.

Double click an archive to view its contents (FIG. 87). Each archive has the following special folders which cannot be deleted:



DVR Recordings which contains videos recorded by continuous or scheduled record services.



A trashcan - This is a special folder which contains media deleted from the rest of the archive. Deleted videos are placed

here. To remove a video completely and free up hard drive space, users with appropriate permissions can delete the video

from the trashcan.



The content folder contains all the rest of the media in this archive. This is the most commonly used area of the archive.

MPEG-2 Video Recommended

High

Full D1

8 Mbits

Medium

Full D1

6 Mbits

Low

Full D1

4 Mbits

MPEG-4 Video Recommended Bitrates

High

Full D1

1.5 Mbits

Medium

Full D1

800 Kbits

Low

SIF

400 Kbits

FIG. 86

List of Archives in a Vision2 System

FIG. 87

Special Folders (Content, DVR Recordings, Trashcan)

«
...
67
68
69
70
71
...
»

Содержание vision2 V8.4





























































































Отзывы:

Нет отзывов

Похожие инструкции для vision2 V8.4

Бренд: Samsung Страницы: 37

Бренд: Samsung Страницы: 2

Бренд: SanDisk Страницы: 27

Бренд: Aiwa Страницы: 80

Бренд: LEXIBOOK Страницы: 66

Бренд: DNA Страницы: 10

Бренд: Rio Страницы: 50

Бренд: Mark Страницы: 12

Бренд: Emerson Страницы: 24

Бренд: Emerson Страницы: 8

Бренд: Emerson Страницы: 8

Бренд: Emerson Страницы: 2

Бренд: Emerson Страницы: 39

MP3 MUSIC & VIDEO PLAYER EMP517-2

Бренд: Emerson Страницы: 35

Бренд: Emerson Страницы: 31

Бренд: Emerson Страницы: 28

Бренд: Emerson Страницы: 31

Бренд: Emerson Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды