AMX Vision 2, Руководство по эксплуатации/справочник

Страница: 13 / 128

Overview
3 Vision
2
Operation/Reference Guide
Supported Third-Party Encoders
Vision
2
supports the following third party encoding units to expand upon the available stream types:

Visionary Solutions AVN200 - MPEG-2 (SD/Full-D1) single channel encoder appliance

Visionary Solutions AVN420 - h.264 (SD/D1 MPEG-4 Part 10/AVC) audio video encoder blade

VBrick WMV Encoder PN 9190-4200-000 Single Channel Encoder (Up to 640 x 480)
The VBrick encoder has a Join Own Multicast setting. This setting is not available on the Vision
2
configuration page, so you must adjust this setting prior to setting up the encoder to interface with the Vision
2
system.
Use the VBrick Web Interface in a web browser to enable the Join Own Multicast setting prior to controlling
the encoder via the Vision
2
system (see FIG. 1).
FIG. 1 VBrick Configuration page
Configure this setting before
using with Vision
2