AMX TX64, Инструкция по эксплуатации, Страница: 9 / 16

TX64 64-Button Transmitter Radio Code Settings 5
Radio Code Settings
Overview
The TX64 must be configured before use. The following provides radio code
guidelines for required configuration of channels and channel groups.
Radio Code
Each pushbutton on your transmitter represents an AXCESS channel number. All
of the pushbuttons on a transmitter represent a group of channel numbers. This
grouping is known as a radio code. After the radio code is set on the transmitter
(Figure 2), each button you press sends a specific channel number to the control
system. For example, if your TXC64 transmitter is set to radio code 4 and you press
button 1, channel number 64 is sent to the control system.
1 2 3 5 6 8
ON
Not used
Setting Radio Codes
Figure 3 lists the radio codes, DIP switch settings, and transmission ranges for the
TX64.
Radio codes, DIP switch settings, and transmission
ranges
Radio
Code DIP Switch Positions Channel code
transmission ranges
7 8 From To
4
8
12
ON
OFF
ON
OFF
ON
ON
64
128
192
127
191
255
Note
Most transmitters are set at
AMX before they are shipped
and will have a label with the
radio code number affixed to
the back cover.
Figure 2
Radio code DIP switch
Figure 3
Radio codes, DIP switch
settings, and transmission
ranges
Note
The formula to determine the
channel number is (button
number - 1) + (radio code
number multiplied by 16).