AMX TPI-PRO-4 Скачать руководство пользователя

Страница: 68 / 218

TPI-PRO/DVI Configuration Pages

TPI-PRO/DVI (Total Presentation Interface)

Setup - Time & Date Settings Page

Press the

Time

button on the

Setup Page

(see FIG. 58 on page 58) to access the

Time & Date Settings Page

(FIG. 61).

The options on this page allow you to view, set or edit the time and date information on the NetLinx Master to
which the TPI-PRO/DVI is connected.



The TPI does not have an on-board clock. This page both receives and sets the time/date of the
NetLinx Master.



If either the time or date is modified on this page and then updated to the Master (via the

Set Time

button), all devices communicating to that target Master are updated to reflect the new information.



The only way to modify a TPI-PRO/DVI’s time without altering the Master is to use NetLinx Code.

Setup - Project Information Page (Cont.)

• Revision Date:

Displays the last revision date for the project.

• Last Save Date:

Displays the last date the project was saved.

• Blink Rate:

Displays the feedback blink rate (10th of second).

• Job Comments:

Displays any comments associated to the job. These comments are taken from the TPD4
project file.

FIG. 61

Setup - Time & Date Settings Page

• Time Date

Refresh/Set:

• The

Get Time/Date

button retrieves the Time and Date information from the Master.

• The

Set Time/Date

button sets the Master to retain and save any time or date

modifications made on the Time and Date Setup page.

• Time Display:

These fields display the time in 3 formats:

• STANDARD

• STANDARD AM/PM

• 24 HOUR (military)

Содержание TPI-PRO-4



























































































































































































































Результаты поиска

Содержание TPI-PRO-4

Отзывы:

Похожие инструкции для TPI-PRO-4

Бренды по названию

Популярные бренды

AMX TPI-PRO-4, Руководство по эксплуатации/справочник

Результаты поиска

Содержание TPI-PRO-4

Отзывы:

Похожие инструкции для TPI-PRO-4

Бренды по названию

Популярные бренды