AMX TPI-PRO-4 Скачать руководство пользователя

Страница: 63 / 218

TPI-PRO/DVI Configuration Pages

TPI-PRO/DVI (Total Presentation Interface)

Calibrate Page

Press the

CALIBRATE

pushbutton on the front panel (see FIG. 54 on page 55) to access the

Calibrate Page

(FIG. 57).

The options on this page allow you to calibrate the input touch device (touch monitor) using the selected touch
driver.

Panel Information Page (Cont.)

• Serial Number:

Displays the TPI-PRO/DVI’s serial number.

• Setup Pages Version:

Displays the type and version of the Setup pages.

• Touch Input Driver:

Displays the driver used for the touch monitor.

• Screen Width:

Displays the pixel width sent by the TPI-PRO/DVI to the display.

• The maximum available screen width on a TPI-PRO/DVI is 1920 pixels.

• Screen Height:

Displays the pixel height sent by the TPI-PRO/DVI to the display.

• The maximum available screen height on a TPI-PRO/DVI is 1200 pixels.

• Screen Refresh Rate:

Displays the refresh rate sent to the display.

• Screen Rotation:

Displays the degree of rotation applied to the on-screen image.

• Power Up Page:

Displays the touch panel page set to display when the TPI-PRO/DVI is powered-up.

• This information comes from the TPD4 project file.

• Most projects begin with a Main page.

• Start Up String:

Displays the string used for start-up.

• Wake Up String:

Displays the string used for an activation after a timeout.

• Sleep String:

Displays the string used during the sleep mode.

• File System:

Displays the amount of internal disk space available on the TPI-PRO/DVI.

• RAM:

Displays the amount of RAM available on the TPI-PRO/DVI.

FIG. 57

Calibrate Page

Содержание TPI-PRO-4



























































































































































































































Результаты поиска

Содержание TPI-PRO-4

Отзывы:

Похожие инструкции для TPI-PRO-4

Бренды по названию

Популярные бренды

AMX TPI-PRO-4, Руководство по эксплуатации/справочник

Результаты поиска

Содержание TPI-PRO-4

Отзывы:

Похожие инструкции для TPI-PRO-4

Бренды по названию

Популярные бренды