Instruction Manual - 4K/60 Scaler
Installation & Wiring
11
Installation
Note: Before installation, ensure the SCL-1 is disconnected from the power source.
To install the presentation switcher on a solid surface:
1.
Position and install the mounting brackets with the four mounting screws provided.
2.
Mount the switcher on a flat and solid surface with the mounting screws.
Wiring
1.
Connect HDMI sources (Blu-ray player, games console, Satellite/cable media server etc.) to the HDMI IN port via an
HDMI cable.
2.
Connect a PR01-0808 matrix switcher or an HDMI display device to the HDMI OUT port of SCL-1.
3.
Connect a PC to the RS232 port for API control.
4.
Connect the included 12V power adapter to the SCL-1.
5.
When you need to upgrade the firmware:
a) Download firmware upgrading execution software to a flash drive.
b) Connect the flash drive to the USB port.
c) Send the Commands by CommUart Assistant to upgrade.
d) When the upgrading is complete, power cycle the SCL-1 OFF and ON.
Attach the brackets provided to side
panels of the device