© 2015 Harman. All rights reserved. AMX, AV FOR AN IT WORLD, and HARMAN, and their respective logos are registered trademarks of HARMAN.
Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/
93-0423-83 REV: E
Last Revised: 11/04/2015
Installing the PS-POE-AF-TC
The PS-POE-AF-TC may be placed on a desktop.
Preliminary Steps
• Ensure that AC power is applied to the PS-POE-AF-TC, using an operational
ground connection.
• Ensure that output Ethernet cable is connected to the DATA & POWER OUT port.
• Verify that a power-ready Ethernet-compatible device is connected.
Before placing the PS-POE-AF-TC:
• Do not cover the device or block the airflow to the device with any foreign objects.
Keep the PS-POE-AF-TC away from excessive heat and humidity and free from
vibration and dust.
• Ensure that the cable length from the Ethernet network source to the terminal
does not exceed 328 feet (100 meters). The device is not a repeater and does not
amplify the Ethernet data signal.
• The PS-POE-AF-TC does not have a power switch. Simply plug the device into an
AC power source.
Installing the PS-POE-AF-TC
1.
Connect the PS-POE-AF-TC to an AC outlet (100-240VAC), using a standard
power cord.
2.
Connect the
DATA IN
jack (input) to the remote Ethernet network switch’s Patch
panel and the
DATA & POWER OUT
jack (output) to the terminal.
Pin Connections
FIG. 2 describes the PoE Gigabit pin-out connections for the IN and OUT Ports on the
rear panel of the PS-POE-AF-TC:
FIG. 2
POE GIGABIT PIN-OUT CONNECTIONS
J2
J1
(Data IN)
(Power and Data OUT)
(rear of unit)
POWER (+)
DATA
Pins 4/5 (DATA + PWR)
DATA
Pins 1/2 (DATA only)
DATA
Pins 3/6 (DATA only)
POWER (-)
DATA
Pins 7/8 (DATA + PWR)
Note:
= Transformer
