AMX NCITE-813 Скачать руководство пользователя

Страница: 81 / 140

FIG. 85

System - Devices page

Changing the System Number on the Master

1. Select the Master from the Device List.
2. Enter the new numeric value into the

New System Number

field.

3. Click the

Accept

button to save this new value to the system on the target Master. The message “

System number changed to X.

Master must be rebooted for the change to take effect.

” reminds you that the Master must be rebooted before the new settings

take effect.

4. Click

Reboot

to reboot the target Master. The Device Tree then reads “

Rebooting...

”. After a few seconds, the Device Tree

refreshes with the current system information (including the updated system number assignment.) If the Device Tree does not

refresh within a few minutes, press the

Refresh

button and reconnect to the Master.

Changing the Device Number on a Device

Note that in most cases, the Device Number for Masters should remain set to zero.
1. Select the device from the Device List. Ensure the device has a device number.
2. Enter the new numeric value into the

Device Number

field.

3. Click the

Accept

button to save this new value to the system on the target device.

Resetting the Master Controller to the Factory Defaults Configuration

Click the

Reset to Factory Defaults

button. Clicking the button resets the Master to its factory default state. Resetting to the

factory default state includes the following tasks:



Removing all security settings



Removing all user files and recreating the

administrator

and

netlinx

user accounts



Removing all roles and recreating the

All_Permissions

and

Studio

roles



Resetting the IP address to DHCP



Loading an empty NetLinx program

Once reset, the Master will be effectively in an out-of-box state.

NOTE: It may be necessary to refresh the browser window after the master has finished booting (click Refresh).

WebConsole - System Options

System - Devices

The

Devices

page (FIG. 85) contains information about the Master and any connected devices. Select a device from the Device List

and its information appears in the Device Information area. The information in this area is view-only, unless the device allows a

change to its device number. If so, you can change the device number on this page (see

Changing the Device Number on a Device

below for more information.) Masters also include a system number which a user can change with proper access (see

Changing

the System Number on the Master

below for more information.)

NX-Series Controllers - WebConsole & Programming Guide

Содержание NCITE-813













































































































































Результаты поиска

Содержание NCITE-813

Отзывы:

Похожие инструкции для NCITE-813

Бренды по названию

Популярные бренды

AMX NCITE-813, Инструкция по эксплуатации

Результаты поиска

Содержание NCITE-813

Отзывы:

Похожие инструкции для NCITE-813

Бренды по названию

Популярные бренды