Appendix A: NetLinx Control
72
N2412A/N2422A User Manual
Batch Configurations Using N-Able
One of the many benefits of using N-Able control is batch configuration. This is especially useful in larger deployments. Instead of
using the individual unit web pages (discussed in the previous section), simply open N-Able and select
Tools > Batch Config
. See
FIG. 70
Selecting Batch Config in N-Able
displays and allows you to choose the units you would like to enable for NetLinx control. To select
multiple units, hold down the
<Ctrl>
key. Once all of the units are selected, enable
NetLinx On
and click the
OK
button at the bottom
of the screen.
FIG. 71
Enabling NetLinx on Multiple Units
NOTE:
Items are not filtered. In other words, if you send a NetLinx command to a device that does not support it, the command is
simply ignored.
Username
Username for the Master Controller.
Password
Password for the Master Controller.
Save
Save settings made on this page.
TABLE 39
NetLinx Configuration Options (Cont.)
Command
Description