AMX BulkRipper - Program Reference
22
MAX-MDL200 Multi-Disc Loader System
The BulkRipper User Interface
All of the main functionality of BulkRipper is included in the primary application window
(FIG. 15). The main elements are described below:
Menu Bar
The BulkRipper menu bar consists of the following menus and commands:
File:
• Settings:
Opens the Settings dialog, where you can specify the IP
address of the target MMS Server for this load operation.
Use the
Record discs with multiple matches
radio buttons to
specify how to handle discs with multiple title matches in the
MMS server database during the transfer process:
• Select
Yes
to transfer discs with multiple matches. In this
scenario, discs that were not positively identified will not
have any disc information associated with them.
• Select
No
to skip transferring any discs that have multiple
title matches, or that are not positively identified (this is the
default setting).
Refer to the
Loading Media to the Target MMS Server
section
on page 11 for details.
• Reset All:
Select this option to stop the transfer process (if applicable),
and reset (clear) all of the disc information in the Disc/Slot
Window. By default, all disc information is displayed in the
Disc/Slot Window until it is manually cleared.
Note that Reset All does
not
clear the First Disc and Last
Disc fields.
• Exit:
Exits the BulkRipper application.
Changer:
• Eject:
Ejects the currently selected (highlighted) disc.
• Load:
Allows you to load a disc into a selected slot position. First
select an open slot position, then select Load and insert the
disc (label side facing to the right).
• Load Range:
This command allows you load all open slots within a speci-
fied range without having to select
Load
each time. When this
command is selected, the MDL200 will present each avail-
able slot on the carousel that is within the range specified so
that you can load a disc into each one. If there are discs
occupying any slots within the range, the MDL200 will auto-
matically skip those slot positions and present the next open
slot within the range for loading.
• Eject Range:
Ejects a specified range of discs, one at a time.
As each disc is ejected, you have 10 seconds to remove it
from the Disc Loading Slot. After 10 seconds, the disc is
automatically reloaded in the same slot position.
• Load All:
This command allows you load all open slots (1-200) without
having to select
Load
each time. When Load All is selected,
the MDL200 will present each open slot on the carousel so
that you can load a disc into each one. If there are already
some discs loaded in the carousel, the MDL200 will automat-
ically skip any slot positions that are already occupied and
present the next open slot for loading.
• Eject All:
Ejects all discs, one at a time. As each disc is ejected, you
have 10 seconds to remove it from the Disc Loading Slot.
After 10 seconds, the disc is automatically reloaded in the
same slot position.