WebConsole - Network Options
36
NX-Series Controllers - WebConsole & Programming Guide
WebConsole - Network Options
Network Overview
The
Network
page (FIG. 30) is accessed by clicking
Network
on the page’s main heading. This page allows you to view and
configure various aspects of the Master’s network:
IPv4 Setup
- Options on this page allow you to view/change the Master’s IP and DNS address information. See the
section on page 37 for details.
IPv6 Setup
- This page allows you to view the IPv6 address, subnet mask, and gateway for the Master. See the
section on page 38 for details.
Date/Time
- Options on this page allow you to enable/disable using a network time source and provide access to Daylight
Saving configuration and which NIST servers to use as a reference. See the
details.
FIG. 30
Network page