AMX IREDIT V1.2, Инструкция по эксплуатации

Страница: 24 / 54

Basic Operations
18
IREdit
Using Identify Function
The Identify feature allows functions to be identified from a list of hand controls. An IRIS
connected to the serial port is necessary in order to utilize this feature.
1.
Use the Search function with the desired criteria. See Searching for IR Hand Control Files.
2.
Within the Search Results window, under the Identify column, click on the functions to be
added to the Identify list.
3.
After all desired functions have been selected, go to Tools > Identify...
4.
Click on the Capture button to begin the identification session.
5.
Begin sending functions to IREdit via the IRIS. As the functions are received, found functions
will be moved to the top of the list.
6.
The next function captured will increment the number of hits column and display in green.
Hand controls with a minimum of one hit but not found in the current capture will display in
blue.
7.
Clicking on the Remove No Hit button will remove all rows that contain no hits.
8.
Select a hand control and click the Open button to open it into the IR Document window.
9.
If the desired hand control is not found click the Close button.
Cut, Copy And Paste Databases
User defined databases can be both cut and pasted into other user defined databases. Conversely,
the AMX database can only be copied.
1. Select the hand control file you wish to Copy or Cut .
2. Select either Edit > Copy or Edit > Cut .
3. Select the user defined database you wish to paste into.
4. Select Paste from Edit Menu .
5. The new IR node then appears in the user defined database.
If you are pasting into a new database an entire product hierarchy must first be
established.
If you are pasting a complete manufacturer line from the AMX database, it may take
a long time so be patient.