Wiring and Device Connections
32
Enova DVX-315xHD & DVX-215xHD All-in-One Presentation Switchers - Instruction Manual
Destination devices require either balanced (differential) or unbalanced (single-ended) connections. FIG. 34 illustrates options for
wiring between output connectors and the destinations.
FIG. 34
Stereo 5-Terminal Wiring
WARNING:
Do not connect the negative terminals to the source connector. Doing so can cause damage to your device.
S/PDIF OUTPUT
The S/PDIF OUTPUT provides digital S/PDIF audio output that can mirror any of the analog audio outputs or HDMI outputs.
FIG. 35 displays the S/PDIF OUTPUT connector.
FIG. 35
S/PDIF Output
Rear Panel Video Inputs and Outputs
The following sub-sections describe each component on the rear panel of the DVX. All digital inputs and outputs on the DVX
support HDCP. Refer to FIG. 6 on page 22 for the component layout of the rear panel.
MULTI-FORMAT VIDEO INPUTS
The MULTI-FORMAT VIDEO INPUT connectors on the rear panel are used to connect video source input devices to the DVX. The DVX
routes video from connected source input devices to the connected output devices. The DVX-3150HD and 3155HD models each
feature four audio outputs (ports 1-4). The DVX-3156HD and 21xx models feature only two audio outputs each (ports 1-2).
FIG. 36 displays the MULTI-FORMAT VIDEO INPUTS connectors on the DVX-3150HD-SP.
FIG. 36
Multi-Format Video Inputs (DVI-I Connectors)
These numbered inputs correspond to the input port number of the video signal when making a switch or adjusting video input
parameters.
NOTE:
The MULTI-FORMAT VIDEO INPUT connectors on the DVX are DVI-I (integrated digital/analog) connectors. These connectors
support both DVI-A (analog) and DVI-D (digital) inputs.
Destination Device
DVX
Balanced Wiring
Unbalanced Wiring
