background image

4

USER MANUAL - DUX-SRX 

100-METER 4K HDBASET SCALING RECEIVER

INTRODUCTIONS

DUX-SRX is 100m HDBaseT Receiver with 4K@60Hz Scaler, transmits uncompressed 

4K@60Hz UHD video, Ethernet, RS232 and IR up to 100m/328ft over a signal CatX cable 

and supports analog and digital audio de-embedding for HDMI audio output. 
DUX-SRX comes with an auto-scaler for HDMI scaling out which can be adjusted by API 

command. In addition, the HDBaseT Receiver is capable of automatic display control 

through CEC or RS232, volume adjustment, Ethernet routing and accepts third-party 

control. 
DUX-SRX HDBaseT Scaling Receiver is ideal for applications where high quality video 

transmission and scaling is required. While working with a Matrix like DUX-8D, a 

standalone AV switching and control system with video scaling will be created and will 

meet requirements for classroom and huddle room applications.  

Features

 

Capable of transmission:

Via Cat5e/6 cable:

- Up to 70m/230ft: 4K@30Hz YUV 4:4:4 24bit or 4K@60Hz YUV 4:2:0 24bit
- Up to 100m/328ft: 1080p@60Hz 36bit 

Via Cat6a/7 cables:

- Up to 100m/328ft: 4K@30Hz YUV 4:4:4 24bit or 4K@60Hz YUV4:2:0 24bit 
- Up to 100m/328ft: 1080p@60Hz 48bit

 

Supports analog and digital audio de-embedding for HDMI Audio Out. 

 

Fully compliant with HDMI 1.4, and compatible with HDMI 2.0 (4K@60Hz, 4:2:0). 

 

HDCP 2.2 compliant.

 

Bi-directional IR, RS232 and Ethernet pass-through over a CatX cable. 

 

Default auto-scaler for HDMI Scaling Out or output resolution adjustment by API.

 

Built-in CEC controller for HDMI OUT. 

 

Built-in RS232 controller for pre-loading or storage of RS232 commands of the 
display device.

 

Automatic CEC and RS232 command to power on or standby the display by 
detecting input signal status. 

 

Seamless switching when using with a Matrix like DUX-8D.

NOTE: The actual signal transmission distance depends on signal resolution and cable 
quality.

Содержание DUX-SRX





























Отзывы: