16
DUX-12F
USER MANUAL
6. CONTROLLING
DUX-12F Switching Matrix is designed with ease of connection and control
in mind. When the Matrix is connected and powered on, you can choose
the optimal way to control the unit at your convenience, either through Front
Panel, IR Remote (IR Receiver can be connected when the Matrix is less
accessible), LAN (for Web UI or Telnet) or RS232.
The following chapters will explain the basic instructions of the above control
methods and are based on a 8x4 DUX-12F Switching Matrix installed with
•
6 x DUX-F-I-HDMIs (HDMI input board),
•
2 x DUX-F-I-HDBTs (HDBaseT input board),
•
2 x DUX-F-O-HDMIs (HDMI output board), and
•
2 x DUX-F-O-HDBTs (HDBaseT output board).
6.1 Control through Front Panel
Basic switch of input sources to output displays can be achieved by using
front panel controls.
Power on the Matrix and wait till the Matrix is ready for operation. Now you
can select input source for each output.
To select an input for each output:
1. Press the Left ( ) or Right ( ) button to select output channel. The LED
blinks to show the selected output channel.
Blinks to show selected output
Press to select output
Press to select input
Press to confirm
2.
Press the Up (
) or Down (
) button to select input channel. If the LED
shows "--", the output is closed.
Содержание DUX-12F
Страница 23: ...23 DUX 12F USER MANUAL Admin Setting Page...