Appendix G - External Serial Controllers
285
Enova Digital Media Switchers - Hardware Reference Manual
NOTE:
A Windows Security window may open and ask if you want to install a driver with an unverified publisher. Select the Install
this driver software anyway option.
8.
If the AutoPatch USB Bridge port specifies the COM number, go to Step 11. If the port does not specify a COM
number, right-click the
AutoPatch USB Bridge
, select
Properties
, and complete all remaining steps (FIG. 174):
9.
In the
AutoPatch USB Bridge Properties
dialog, select the
General
10.
Make note of the COM port number assigned to the AutoPatch USB Bridge.
This port number
must
be entered when setting a connection in a software program or a terminal emulation
program. The PC will always associate a specific USB connector with the assigned virtual COM port. The PC
will not
recognize the module if you disconnect and reconnect using a different COM port on the PC.
FIG. 173
Update Driver Software - Unknown Device dialog
FIG. 174
Device Manager
FIG. 175
AutoPatch USB Bridge Properties dialog (General tab)
COM port number (if not displayed, complete all remaining steps)
Assigned COM port number