System Configuration Interface
200
Enova Digital Media Switchers - Hardware Reference Manual
Under General settings from the EDID Mode drop-down list, select the mode: Basic, PCM 2-Channel, PCM Multi-Channel,
Dolby Digital, Dolby D DTS, Dolby D MPEG, Dolby D AAC, Dolby TrueHD, DTS HD Master, Dolby Atmos,
or Dolby Digital Plus.
Loading and Saving EDIDs
For custom EDIDs, click the Load EDID button and browse for the .edid file on your device/computer. Once the EDID is
loaded, make any necessary changes and use the Save EDID button to save the altered .edid file to your device/
computer.
NOTE:
Some devices run on a secured file-system. As such, file-system operations (e.g., Load and Save operations) may
not be supported by the device’s default capabilities and may require downloading a file manager application.
Status Page
The Status page is used to check a number of the switcher’s components and their states. The components (from top to
bottom of page) display status for Alarms, the Chassis, the Master CPU Board, Input and Output Boards, and Input and
Output Expansion Audio Boards. A quick glance at this page will indicate whether the system is running okay (green text
will state OK) or if any thing is failing (red text will state FAIL.)
IMPORTANT:
The Status page settings are not asynchronous. To obtain the latest information, the Refresh button must be
clicked.
The example in FIG. 120 is based on an Enova DGX 3200 Switcher with two each standard Input and Output Boards, as
well as two Expansion Audio Boards.
FIG. 120
Status Page
System Auto-Setup
Chassis
Master CPU (MCPU) Board
Input Boards
Output Boards
Input Audio Expansion Boards
Output Audio Expansion Boards
Refresh
Refresh
Alarms
