For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
3/08
©2008 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.
AMX reserves the right to alter specifications without notice at any time.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
93-1120-01
REV: A
Customizing LCD Keypad Labels
Customization of labels displayed on the LCD keypad is done via the
Setup
menu on
the front of the Controller. Both
Source
labels and
Source Control
labels can be
customized (FIG. 3).
Customizing Source Labels
1.
Enter the
Setup
menu from the front of the Matrix Controller, by pressing the
SELECT
button.
2.
From the menu displayed, select
SETUP / MRC / PROGRAM
.
3.
Select the
source #
of which you wish to customize the source name. The
default Source name will be displayed.
4.
Select
Label
. The first letter of the
Source Name
will be highlighted. Use the
UP/DOWN
buttons to change the letters in the source name.
•
To move from letter to letter, use the
FORWARD >>
button.
•
To delete a letter, use the
<< BACK
button.
•
Press the
CENTER
button to save the label.
Note
: Source Names are limited to 6 characters.
Customizing Source Command Labels
1.
Enter the
Setup
menu from the front of the Matrix Controller, by pressing the
SELECT
button.
2.
From the menu displayed, select
SETUP / MRC / PROGRAM
.
3.
Select the
source #
of which you wish to customize the source command
name.
4.
Select
Learn IR
. The first IR command for the source will be displayed.
5.
Select
Next
until the IR command you wish to customize is displayed.
6.
Select
Label
. The first letter of the
IR Command Name
will be highlighted. Use
the
UP/DOWN
buttons to change the letters in the IR command name.
•
To move from letter to letter, use the
FORWARD
button.
•
To delete a letter, use the
BACK
button.
•
Press the
CENTER
button to save the label.
Note
: Source Command Names are limited to 6 characters.
Basic Functionality
Turn On a Source (single room)
Touch (select) the desired source. The LCD screen will switch to the
Source MAIN
screen and the source will begin playing. An arrow will be displayed beside the
source name to indicate that the source is ON (see FIG. 4).
Turn Off a Source (single room)
Select the source that is currently On. The source will no longer play and the arrow
will no longer be displayed beside the source name.
Turn a Source On in All Rooms
From the
HOME
screen, touch
ALL ON
. The text
Select Source
will flash. Select
the desired source. All rooms will begin playing the selected source.
Turn All Rooms Off (System Off)
From the
HOME
screen, touch
ALL OFF
. Audio in all rooms will be turned off.
KP-LCD Advanced Functionality Screen
Advanced functions are accessed by simultaneously pressing & holding the
Vol - / Vol+
buttons for 3 seconds (FIG. 5).
Note
: Advanced Functionality is largely reserved for Mi/Tango Controllers. Only
Backlight and Tone (except for SRS) are available on Delta Controllers.
Grouping Rooms
1.
With the desired source ON, access the
Advanced
screen and select "
GROUP
ROOMS
".
2.
Select "
Create a Group
" to specify the rooms to be included in the Group.
3.
Select "
Group ALL
" to group all rooms.
Note
: When a group is created all rooms included in the group will behave as one
room (same source & volume)
•
To adjust the Group Volume, Touch
Vol - / Vol+
while on the
Group
screen.
•
To adjust the Volume for an individual room, exit the
Group
screen, and touch
Vol - / Vol+
from the keypad in each room.
•
To clear a Group, access the
Group Room
screen and touch "
Clear Group
".
Setting/Clearing the Alarm Clock
1.
To set an Alarm for a specific room, access the
Advanced
screen and select
"
ALARM CLOCK
".
2.
Select "
Set Alarm
".
3.
Select the source by touching "
Source
" to scroll through the available sources
4.
Set the time & adjust the volume and touch
SET
.
When the selected time is reached, the room will turn on to the selected source and
the volume will ramp up to the set volume.
•
To clear an Alarm for a specific room, select "
Clear Alarm
".
•
To clear all Alarms for all rooms, select "
Clear All Alarms
".
Locking/Unlocking Keypads
When a keypad is locked, touching the screen or buttons will have no effect until the
keypad is unlocked.
1.
To lock a keypad, select "
LOCK KEYPADS
" from the
Advanced
screen and
select "
LOCK/UNLOCK
".
2.
Select the room to be locked/unlocked and touch
SAVE
or
MORE
.
To unlock all keypads, select "
UNLOCK ALL
" from the
Lock Keypads
screen.
Tone Control Settings (Bass/Treble/Balance/SRS)
Note
: SRS/WOW is a registered trademark of SRS labs, Inc.
Bass/Treble/Speaker Balance & SRS
®
can be adjusted for each room by accessing
the
Advanced
screen and selecting "
TONE CONTROL
".
Note
: SRS is supported only on Mi Series Audio Controllers.
•
To adjust Bass touch
BASS
"
+
" or "
-
".
•
To adjust Treble touch
TREBLE
"
+
" or "
-
".
•
To adjust Speaker Balance touch
BAL
"
<L>
" or "
<R>
".
•
To add/change an SRS option, touch
SRS
and select one of the SRS options
(BASS BOOST, 3D, WOW and FOCUS).
•
To remove or turn SRS off select "
SRS OFF
" from the
SRS
screen.
Backlight Settings
The Intensity and Mode can be adjusted for the LCD keypad by accessing the
Advanced
screen and selecting "
BACKLIGHT
".
•
To adjust Intensity, touch the
%
to increase/decrease the brightness of the
screen (range = 5% - 95%).
•
To adjust the Mode, touch the text to scroll through the options (ALWAYS ON,
ALWAYS OFF, and AUTO ON (
backlight turns off after 30 seconds
)
Privacy Mode
To access Privacy mode:
1.
Select
MORE>>
in the Setup Main screen.
2.
Select
PRIVACY MODE
to display the
Privacy Mode-More
screen.
Note
: <<BACK will return you to the Setup-Main screen.
3.
Selecting
OK
on the
Privacy Mode-More
screen will set the room to Privacy
Mode: no pages will be heard in this room
4.
Select
CANCEL
to return to the Main Screen where you can select a Source.
Additional Documentation
Refer to the LCD Keypads Operation/Reference Guide (available at www.amx.com)
for additional information on Customizing LCD Keypad Labels and Using the LCD
Keypads.
FIG. 2
Touch Panel Keypad - 12 Touch Fields
FIG. 3
Source Labels and Source Control labels
FIG. 4
Basic Functionality - Home, Source MAIN and Source MORE screens
Source
Source Control
Labels
Labels
HOME Screen
Source MAIN Screen
Source MORE
FIG. 5
KP-LCD Advanced Functionality screen
Room Grouping options
Alarm Clock options
Keypad Lock options
Tone Control settings
Backlight settings
