AMX Computer Control PC Presenter, Инструкция по эксплуатации, Страница: 15 / 34

Pre-Installation
11
PC Presenter
FIG. 12 shows a close-up view of the SW2 and SW3 internal slide switches.
1. Discharge the static electricity from your body and the screwdriver.
2. Unplug all connectors from the rear panel of the AXR-MSE.
3. Remove the four Phillips-head screws on the sides of the enclosure.
4. Remove the cover.
5. Set the AXR-MSE switch SW2 for use without a CPU as follows:
For keyboard use without a PC, slide the SW2 switch to the "NO PC" position shown in
FIG. 13.
FIG. 11 AXR-MSE internal circuit board showing the location of the SW2 and SW3 slide switches
FIG. 12 Close-up view of SW2 and SW3 internal slide switches
FIG. 13 Switch setting for keyboard use without PC connected
Top front view
SW3
SW2
SW3
PS2
mouse
Serial
mouse
SW2
NO
PC
PC
SW2
NO
PC
PC