AMX AXB-DMX512 DMX512 INTERFACE Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 32

AMX AXB-DMX512 DMX512 INTERFACE Скачать руководство пользователя страница 22

Programming

18

AXB-DMX512 DMX512 Interface

Axcess Level Send_Commands

There are eight levels tied to the Axcess system. The following table lists the Axcess level
Send_Commands.

Group Buffer Commands (Cont.)

Command

Description

GX

Disconnects groups from Axcess level
or DMX level.

This command disconnects one or more groups from Axcess levels or
DMX inputs that they are connected to.
The list can be single groups and/or ranges of groups separated by
commas.
Syntax:

"'GX<list of groups>'"

Example:

SEND_COMMAND DMX,'GX1'

Disconnects Group 1.

SEND_COMMAND DMX,'GX5,10-15'

Disconnects Groups 5 and 10 through 15.

GZ

Disconnects and erases all groups.

This command removes all outputs from all groups and disconnects
these groups from Axcess levels or DMX inputs that they are
connected to. Removes

all

DMX outputs from all groups in addition to

disconnecting any levels or inputs.
Syntax:

"'GZ'"

Sets all levels in the group buffer to zero.

Axcess Level Send_Commands

Command

Description

AC

Connects one DMX input to one
Axcess level.

Only one DMX input can be connected to an Axcess level at one time.
The Axcess level value is then only affected by a change in the DMX
input value. If the Axcess level is connected to a group, then the
groups will change with the DMX input.
Syntax:

"'AC<Axcess level>D<DMX input>'"

Variables:

Axcess level = 1 - 8
DMX input = 1-512

Example:

SEND_COMMAND DMX,'AC1D512'

Connects DMX Input 512 to Axcess level 1.

SEND_COMMAND DMX,'AC1D2'

Connects DMX Input 2 to Axcess level 1.

«
...
20
21
22
23
24
...
»

Содержание AXB-DMX512 DMX512 INTERFACE

































Отзывы:

Нет отзывов