AMX AutoPatch CP-15 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 38

AMX AutoPatch CP-15 Скачать руководство пользователя страница 33

Installing a CP-15 Remote Control Panel

30

CP-15 Instruction Manual

Rack Installation

CP-15 Remote Panels are designed to fit in a standard EIA 19 in. (48.26 cm) rack.

Once the CP-15 Remote is wired, follow the rack installation instructions below. If linking multiple
panels, see “Linking Multiple Panels” on page 31 before installing the panels in a rack.

Note:

The optimum viewing angle for the screen is eye level.

To install the CP-15 Remote in a rack:

1.

Insert the wired panel through the rear of the rack.

2.

Attach with front-mounting screws to hold it firmly in place (FIG. 12), repeating for each panel in a
multi-panel system.

Tip:

You may find it easier to install the top panel first and move down from there

.

3.

Apply power to the panel(s).

4.

Wait briefly for the system to establish communication with the remote panel.

Perform a test switch to make sure the system is working properly (see “Completing the Installation” on
page 32). If the system is not working properly, check all system connections and retry the test switch
before contacting technical support (for contact information, see page 34).

Note:

If the remote control panel was not part of the original system, you will need to load the

configuration file to the CP-15 Remote; for instructions, see page 26.

FIG. 12

Place in rack and fasten with mounting screws

«
...
31
32
33
34
35
...
»

Содержание AutoPatch CP-15







































Отзывы:

Нет отзывов