Basic Configuration
16
Alero 8-Channel Microphone Mixer Instruction Manual
Basic Configuration
Most maintenance tasks are performed in the
Basic Configuration
page (FIG. 31) where users can perform firmware upgrades,
store and load settings and change login credentials.
Save and Load Settings
To save the current settings for network and audio, press
Save Settings
in the
Basic configuration
page (FIG. 31). The saved
settings will also be used after a reboot.
To retrieve the last saved settings press
Restore Saved Settings
.
Firmware Upgrade
Firmware upgrades can be performed using the
Basic configuration
page (FIG. 31).
1.
Click
Choose file
to select a new firmware file from the local computer. The naming convention of new firmware releases is:
firmware-package_yyyymmddhhmm.bin
2.
When the new firmware is selected, press the upload button to start the firmware upgrade. Alero will update the firmware and
restart. Settings will be stored and used with the new firmware.
Factory Reset
If somehow the product has ended up in a bad state, there is an option to reset the device to factory settings. Follow these steps for
performing a factory reset.
1.
Remove power from Alero.
2.
Press the Reset button on the rear panel for approximately 5 seconds while reapplying power to Alero.
3.
Wait for Alero to start.
NOTE:
All settings and firmware upgrades will be lost when performing a factory reset.
FIG. 31
Basic Configuration Page