7
ENGLISH
Replacing the Carbon Filter
1. Power off and unplug the unit.
2. Remove the front cover of the unit by placing your fingertips under
the upper most edge of the front shield, gently pull up on the shield to
disengage (should hear snap) then lift the shield off the unit.
3. Remove the Pre-Filter/HEPA by disengaging the lock at the top of the
HEPA Filter. Set these filters off to the side.
4. Remove the Carbon Filter set off to the side.
Note: Make sure you do not let any carbon particles stain your
clothing, furniture or carpeting.
5. Remove your new Carbon Filter from the packaging
6. Reinstall your new Carbon filter into your unit.
Note: there is an angled edge on the carbon filter. This edge will fit
inside your unit on the lower left.
7. Install the Pre-Filter/HEPA filter combination and lock into place.
8. Replace the front shield by positioning the shield over the display and
let it gently fall into place engaging the magnets on the bottom of the
shield. Then gently push until you hear a soft snap at the middle of the
shield at the upper most edge of the display
9. Plug in your unit.
10. The Carbon Filter monitor light will automatically change from red
to green.
Customer Service:
Please read this manual carefully. If you have
questions concerning the installation or operation
of your Atmosphere Sky™ Air Treatment
System or to order replacement parts, please
contact Customer Service or via the Internet at:
amway.com/shopatmosphere or amway.ca/
shopatmosphere
(in Canada).
US - 1-800-253-6500
[email protected]
Canada - 1-800-265-5470
[email protected]
Go to Amway.com for your return form and
additional return information such as how to’s,
tracking information, and processing fees.
Track your return with an Amway return label
at: returnscenter.smartlabel.com/amway. For all
returns, Amway Independent Business Owners are
charged a $5.95 processing fee per invoice. Any
merchandise returned due to errors or damages
upon delivery will not incur a processing fee. We are
not liable for return merchandise that doesn’t not
reach our returns facility.
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1)
This device may not cause harmful interference, and
2)
This device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the module/product.
- Increase the separation between the equipment and
module/product.
- Consult the dealer or an experienced radio/TV technician
for help.
- Changes and modifications made to the equipment without
the approval of manufacturer could void the user’s authority
to operate this equipment.
Locked
Unlocked
