Amtek U560, Руководство пользователя, Страница: 39 / 43

30
Operating System loses effect – the power saving mode of
Microsoft operating system adopt ACPI mode (advanced
Configuration and Power Interface), the power scheme will
be handle by the OS thus affecting the power saving mode
of the system
Display problem
Problem:
Display LED too bright or too dark
Solution:
Adjust the LED brightness, press the hotkey
combination by brightness up or brightness down
Problem:
The whole image does not display on the screen
Solution:
This symptom will occur if you are executing any
program or playing games design to run only on 800x600
resolution. Adjust the display to a higher resolution.
Problem:
Can not execute any function
Solution:
This only happens when the system is in hold status. Slide
the power/hold switch to power on, this time the charge
LED indicator will lit thus allowing you to restart your
computer
If you are operating the computer using the battery,
examine the battery charge status
Problem:
The power switch is not operating
Solution:
This only happens when the system is in hold
status. Slide the power/hold switch to power on, this time the
charge LED indicator will lit thus allowing you to restart your
computer
OS Crash
Solution:
Restart your system, when it enter the DOS mode
with the term “Press Hot Key to Restore” appearing on your
screen, press the AP key immediately to restore the system OS.
After recovering all data, you are now required to calibrate your
cursor pointer. You can select the “
ENE Touch Screen”
function.
C
lick on the “ ENE ” icon located at the lower right