address of the IP address pool here. These address should be part of the same IP
address subnet as the router’s LAN IP address.
Enter the Lease Time
Knowledge Expansion
DHCP
(Dynamic Host Configuration Protocol) assigns an IP address to each device
on the LAN/private network.
When you enable the DHCP Server, the DHCP Server will automatically allocate an
unused IP address from the IP address pool specified in this screen to the requesting
device as long as the device is set to “Obtain an IP Address Automatically”.
If you disable this feature, you have to manually configure the TCP/IP settings for all
PCs on your LAN to access Internet.
Lease Time:
is the length of the IP address lease before it is refreshed.
Tips
By default, the router functions as a DHCP server. Do not disable the DHCP server
feature unless you want to manually configure the TCP/IP settings for all PCs on your
LAN.
1. Lease time will be renewed automatically upon expiry. No additional configurations
are needed.
2. If you are not an advanced user, the default DHCP server settings are
recommended.
In order to use the function of the router's DHCP server, LAN in the computer's TCP/IP
protocol must be set to “automatically obtain IP”.
4.5.2 DHCP List & Binding
Set Steps
：
①
Click “
DHCP Server
”
.
②
Select “
DHCP List& Binding
”
.
