Installation Diagram
™
ASD-400 LIQUIDFLO™
AUTOMATIC LIQUID SOAP DISPENSER
INSTALLATION & OPERATION MANUAL
Installation Instructions (refer to installation diagram above)
Battery Pack
4-D Size
(Batteries Sold Separately)
Reset Button
Liquid Soap Bottle
(800 mL)
Spout
Spacer
Sensor Cable
Mounting Bracket
Countertop or Sink
Max. Thickness: 2” (50mm)
AD05
6 Volt AC Power Adapter
(Optional-Sold Separately)
(Optional)
1. If hole is not present drill a 1” (25.4mm) hole on countertop (refer to installation template on page 4).
2. Mount the spout onto the countertop or sink and hand tighten mounting bracket and spacer without damaging sensor cable.
3. Install batteries into battery pack and mount battery pack onto back wall using provided hardware
(battery pack must be installed within 15” (380mm) of spout).
Note: An optional 6 Volt AC power adapter (Part# AD05) can be purchased separately if electrical power is required.
4. Screw soap bottle coupler onto threaded stem and hand tighten.
5. Fill up bottle with liquid soap
(Important: Use low viscosity liquid hand soap with no abrasives).
*Viscosity Range: (mPa•s or Cp): 100-3800 / pH Range: 5.0 - 9.0
*Failure to use soap products within the required range of viscosity and pH may result in damage to product and
void warranty.
6. Screw soap bottle onto soap bottle coupler and hand tighten.
7. Connect sensor cable onto battery pack (you will hear pumps and soap will purge for approximately 5 seconds).
8. Soap dispenser is now ready for use.
Soap Bottle Coupler
Threaded Stem
Low Battery Indicator
Low Soap Indicator
Flashing BLUE LED
Flashing RED LED
Liquid soap refill only
(Solo jabon de liquido)
Reset Button
Press and hold for 7 seconds to prime soap
(Aprete y sostenga por 7 segundos para subir el jabon)
www.amtcorporation.com
Attention:
Make sure sensor cable is passed
through the opening of the spacer
to avoid damage.
Page 2 of 4
Parts List
Reset Button
Press and hold for 7 seconds to prime soap
(Aprete y sostenga por 7 segundos para subir el jabon)
www.amtcorporation.com
Liquid soap refill only
(Solo jabon de liquido)
A
C
F
G
H
D
E
I
(Optional-Sold Separately)
ASD-400
ASD-400EL
A-1
Ref #
Description
Part #
A
C
D
E
F
G
H
Battery Pack
800ml Soap Bottle
Mounting Screws
Soap Bottle Coupler
Mounting Bracket
Spacer
Spout
ASD-4BP
ASD-4SB
ASD-4MSC
ASD-4SBC
ASD-4MB
ASD-4SPA
ASD-4SPT
I
AD05
6-Volt AC Power Adapter
(Optional)
J
AD05-2
6-Volt AC Power Adapter
w/Extension for 2 Devices
K
AD05-2-EXT
Extension Only for AC
Power Adapter
A-1
EL Spout (6” Long)
ASD-4SPTEL
B
B
Spout Filter Assembly
ASD-4FA
K
(Optional-Sold Separately)
J
(Optional-Sold Separately)
