™
ASD-400 LIQUIDFLO™
AUTOMATIC LIQUID SOAP DISPENSER
INSTALLATION & OPERATION MANUAL
Page 1 of 4
READ BEFORE INSTALLATION:
During the initial installation you may
need to prime the soap 4-5 times to get
the soap to pump through the spout.
In some cases there may be some
trapped air in the system that does not allow
the soap to initially prime. If this is the case
you will need to blow through the soap filter
to clear the trapped air. Then prime the soap
again. The soap should now prime through
the spout.
For further assistance please call
Technical Support at 1-800-874-7822.
IMPORTANT PRE-INSTALLATION NOTE
Soap Filter
