Rear Panel
1. MIC Interrupt Time Adjustment (adjusts from sharp to gradual the restoration of
AUX inputs after interruption by MIC input)
2.
MIC Input (1/4”/6.3mm) (Do not use if front panel MIC input jack is used)
3. AUX 1 Input (RCA) Note: although dual input jacks allow stereo input, the left and
right channels are summed into a single mono amplified channel
4. AUX 2 Input (RCA) Note: although dual input jacks allow stereo input, the left and
right channels are summed into a single mono amplified channel
5. Line Level Output (RCA) Note: These outputs pass the same audio that pass to
the speakers, but without amplification. If AUX inputs are stereo, the left and
right channels are passed to these output jacks
6. Common Speaker Output
7. 4-16 ohm Speaker Output (select only one connection from 7, 8, and 9)
8. 70V ohm Speaker Output (select only one connection from 7, 8, and 9)
9. 100V ohm Speaker Output (select only one connection from 7, 8, and 9)
10. 100-120 VAC Power Input with replaceable fuse (Fuse Type: T2AL - 2 Amp 250
VAC Anti-Surge)
