TEMPERATURE UNIT(°C or °F)
Press
button to toggle the temperature unit
(°C or°F) .
UNIT
MAXIMUM/MINIMUM
Press
button to appear MAX/MIN.
MODE
Note:
a) MAXIMUM. MINIMUM:
The unit automatically records maximum reading
and minimum reading after powered on.
b) RESET MAX/MIN:
Power off the meter to reset MAX and MIN reading.
TAKING MEASUREMENT
The meter starts the measurements when powered
on and updates reading every 2 sec. Response time is
2 Sec. for RH.
If the operation environment changes (ex. From
high to low temp.), it takes approx. 30 minutes for RH
into stable measurement.
4
RECORDING MEASUREMENT
(AMT207 only)
While recording, the green LED light is flashing. If you
have set up Hi, Lo alarm value, the red LED will be
flashing while detecting the value which exceeds the
threshold.
Logger status shows at the bottom of the screen.
Enter setting part only if you want to set up.
Always connect meter with PC before turn on the
software. PC needs time to search meter ’s COM port.
If software doesn’t record automatically, please exit
software and turn on again.
NOTE:
