www.amtelectronics.com www.amtelectronics.com
2 2
General Characteristics
Drive Series Effects are designed to be connected to "clean" channel inputs of guitar
combos and amplifiers and are intended for getting overdriven guitar sound. The
effects of the series allow performers to obtain warm, natural sound within a wide
range of legendary tube amps preserving individuality of your instrument.
In the Drive Series we used new original circuitry solutions developed by AMT
specialists based on tube stages emulation which allow you to get bright and rich
sounds in the style of original tube overdrives while using low voltage (9V) power
and insignificant electric current consumption (less than 4mA).
When using Drive Series Effects you should be aware of the fact that the resulting
sound is mainly affected by the combo or amplifier you use as well as the instrument
you play.
The series feature the passive bypass, which, on the one hand, is cable-quality
dependent, on the other - retains the original sound of the instrument when the effect
is off.
CAUTION!
The pedals of AMT FX-Drive series like many other top-class devices
are sensitive to power adapters’ quality. We urgently recommend
using either 9V battery 6F22 or the quality adapter
Before you start
For the purpose of transportation the device was carefully packed by the
manufacturer. However, if cardboard packaging is damaged, it is necessary to check
the device for the presence of external damages.
¾
In case of damages do not send the device to us, but inform the
seller and transport agency since otherwise you lose the right
to damage compensation.
¾
In order to avoid damages during storage and transportation
always use original packaging.
¾
Do not allow children to play with the device and packaging
materials.
¾
Please recycle all packaging materials in the way harmless to
environment.
¾
Operating the device next to powerful radio transmitters and
sources of high-frequency signals can lead to significant sound
distortion. In this case increase the distance between the
device and the transmitter and use the screened cables for all
interconnections.
Controls
Drive Series Effects are easy to handle and require minimum adjustments.
The pedal sensitivity is determined by the position of GAIN (8) control and
depending on the model provides overall sensitivity corresponding to the sensitivity
of emulated overdrive.
The output level is determined by the position of LEVEL (2) control; its 13 hours
adjustment provides the standard level of -10dB. The output level at its maximum
position r8 dB, so use this position only if you want to overdrive the input
circuit of your combo or amplifier.
The pedal also features TONE (4) control, which is designed for general tone
matching of the pedal overdrive with clean or crunch channel of your combo (amp).
In this case, it is recommended to adjust basic tone control directly in the combo.
To enhance the tone matching with amplifiers and combos that have different overall
sound character, we provided incremental adjustment of VOICE (6).
Main Controls:
1.
Pedal operation indicator;
3.
Output to guitar combo input;
5.
Power adaptor connector.
7.
Guitar input.
9.
EFFECT / BYPASS modes footswitch
Individual Effects Features
Drive Series Effects is represented by several pedals each of which focuses on
obtaining a particular overdrive type.
P-Drive
effect creates probably the most aggressive sound of the entire line; it
is generated by 6(!) stages similar to Peavey 5150 and 6505 preamp sections.
Ultimate saturation with harmonics and richness - such is the sound
characteristic of this pedal in a nutshell.
S-Drive
. In the early 1990s Mike Soldano created the amp which has become
a kind of the metal sound standard implemented in various Lead-channels
(Soldano, Mesa Rectifier, H & K Triamp). The common basis of these
amplifiers was the 5-stage preamp, whose solid and bright sound character is
emulated by S-Drive effect.
Vt-Drive
. The concept of VHT amps lead channels is a kind of uterine growling
overdrive. The AMT engineers tried to implement it as far as they could in Vt-
Drive effect.
B-Drive
. Among the lovers of contemporary sound there are those who prefer
a slightly refined but at the same time fascinating sound of Sharp Bogner /
Hafler TG, whose cold aggressiveness is conveyed by B-Drive effect.
E-Drive
. E-Drive pedal effect reproduces the basic Engl overdrive features.
Engl Amps have become a special branch in today's sound. Its convex and at
the same time German rigorous character is formed by the E-Drive’s four
stages driven to their maximum.
M-Drive
. The popular in the 1980s Marshall JCM800’s mid-gain overdrive has
become a classic due to its ability to produce a wide gain range. M-Drive effect
shapes the structure of the overdriven sound characteristic of JCM800
retaining the lightness at small gain and increasing the sound density at
maximum gain values.
O-Drive
. Those who prefer low-gain amps often chose the velvet and sparkling
sound of Orange amplifiers whose character we were especially happy to
reproduce in our O-Drive pedals.
Battery replacement
Use only the batteries recommended by the manufacturer.
To replace the batteries:
1.
Remove the bottom cover of the guitar pedal by slightly loosening
two (two) fastening screws using a small cross screwdriver.
2.
Remove the old battery and disconnect it from connector.
3.
Connect the new battery to the connector and put in place.
4.
Replace the bottom cover of the device and fasten it by means of 2
(two) fastening screws.
Names used in this document are trademarks of their respective owners, which are in no
way are associated or affiliated with AMT Electronics. These trademarks of other
manufactures were used to identify products whose sounds were reviewed in the making of
this product.
AMT Electronics reserves the right to make changes in the design and appearance of the
device which in no way violate the product’s consumer properties without prior notification.
Therefore specifications and appearance of the product can differ from the ones shown in
the given document.
