<7>
Getting Started
Let us explore the range of controls of your ADG-1.
Connect your guitar or other instrument to the
IN
put jack. Connect an
amplifier, mixer or DI box to the
OUT
put jack. If you have an expression
pedal (or 0-5V control voltage source like a synthesizer output), connect it
to the
EXP
ression input.
Use a 9V regulated 2.1mm, center-negative, power supply, capable of
providing at least 200mA of power and connect it to the 9V DC input.
Be sure to power up the ADG-1
BEFORE
turning on your amplifier to
prevent speaker pop and the potential to damage your speakers or
headphones.
Note:
If not using the expression input; be sure the expression switch is
NOT SET TO THE TIME POSITION
to start. We recommend setting it
to
AMT
if not using this feature.
To start, set the ADG-1 to the
Home
position as shown in the
graphics to the right.
Set
TIME
,
MIX
&
TONE
straight up (12:00).
Set
FEEDBACK
,
RATE
&
AMOUNT
switch fully
counter- clockwise (7:00).
Set
DRIVE
slightly up, around 9:00.
Set the Bucket and LFO switches to the down position.
There is no way to damage the ADG-1 through knob settings so feel free to
explore how each control works. Go ahead, play with your ADG-1 and
have fun. There are some hidden tricks, gotchas and advanced possibilities,
so once you are done having fun read on to learn more about the ADG-1.
